How to Read Oil Tank Gauge

Oil tank gauges are an important part of keeping your home warm in the winter. If you have an oil-fired furnace, you need to check your oil level regularly to make sure you have enough fuel to last through the heating season. Here’s how to read your oil tank gauge so you can keep track of your oil level.

  • Locate the oil tank gauge
  • This is usually located near the top of the tank
  • Read the arrow on the oil tank gauge to determine how full or empty the tank is
  • If the arrow is pointing to “Empty” then you will need to order more oil
  • If the arrow is pointing to “Full” then you do not need to order more oil at this time
How to Read Oil Tank Gauge


How Can I Tell How Much Heating Oil is in My Tank?

If you have a heating oil tank, it’s important to know how much oil is in it at all times. After all, you don’t want to run out of heat in the middle of winter! There are a few different ways to tell how much oil is in your tank.

One way is to simply look at the gauge on the side of the tank. Most tanks have a built-in gauge that will give you a good estimate of how full or empty the tank is. Of course, this method isn’t always 100% accurate, so it’s always best to err on the side of caution and assume that there is less oil in the tank than what the gauge says.

Another way to tell how much heating oil is in your tank is to use a stick or rod to measure the depth of the oil. Simply insert the stick into the fill opening until it hits bottom and then mark where the top of the oil reaches on the stick. With this measurement, you can calculate approximately how many gallons of oil are in your tank.

Lastly, many companies that deliver heating oil will also keep track of how much is in your tank for you. They can usually give you an accurate reading when they come to refill your tank. This method requires no work on your part and ensures that you’ll always know exactly how much heating oil you have on hand.

How Do You Know If Your Oil Tank is Empty?

If your oil tank is empty, there are a few things you can do to check. First, check the gauge on the side of the tank. If it reads “empty,” then your tank is most likely out of oil.

Second, check the fill pipe on the side of the tank. If there is no oil coming out of this pipe, then your tank is probably empty. Finally, look for any signs of leaks around the base of the tank.

If you see any oil on the ground, then your tank is likely empty.

How Does an Oil Level Gauge Work?

An oil level gauge is a device used to measure the oil level in an engine. The gauge is usually mounted on the side of the engine, near the oil dipstick. There are two types of oil level gauges: mechanical and electronic.

A mechanical oil level gauge consists of a float that rests on top of the oil in the engine. The float is connected to a rod, which goes up to a pointer on the gauge. As the oil level rises or falls, so does the float, and this movement is reflected by the pointer on the gauge.

An electronic oil level gauge works in a similar way to a mechanical one, but instead of using a float and pointer, it uses an electronic sensor. The sensor measures the height of the oil in the engine and sends this information to a display unit. The advantage of an electronic over a mechanical gauge is that it is more accurate and easier to read.

How Long Will an Eighth of a Tank of Oil Last?

Assuming you are talking about a car, an eighth of a tank of oil would last for probably about 50 miles. This is just a rough estimate because it all depends on the size and make of your car as well as how you drive. If you have a small car and drive relatively slowly, your car will be more fuel efficient and thus the oil will last longer.

However, if you have a larger car or SUV and drive aggressively, your car will burn through fuel much faster and thus the oil will not last as long. Ultimately, it all comes down to how you drive and what kind of vehicle you have.

Pricerite Heating Oil | Reading Your Tank Gauge

Oil Tank Level Indicator

Oil tanks are an essential part of many homes and businesses, but they can be dangerous if not properly maintained. An oil tank level indicator is a device that helps you monitor the level of oil in your tank, so you can avoid overfilling it or running out of fuel.There are two main types of oil tank level indicators: mechanical and electronic.

Mechanical indicators use a float to measure the level of oil in the tank, while electronic indicators use sensors to measure the level of oil. Both types of devices have their pros and cons, so it’s important to choose the right one for your needs.Mechanical indicators are typically more accurate than electronic ones, but they can be difficult to install and calibrate.

Electronic indicators are easier to install and usually don’t require calibration, but they may not be as accurate as mechanical models.If you’re looking for an easy-to-use oil tank level indicator, an electronic model is probably your best bet. But if accuracy is your top priority, a mechanical indicator is worth considering.


If your home has an oil-burning furnace or hot water heater, you’re probably familiar with the sight of an oil tank in the basement. These tanks are usually made of steel or fiberglass and can range in size from 50 to 10,000 gallons. Most residential tanks hold 275 gallons of oil.

While the size and construction of these tanks may vary, they all have one thing in common: a gauge that indicates how much oil is in the tank. If you’ve ever wondered how to read this gauge, here’s a quick primer.The first thing you need to know is that there are two types of gauges: floating arm and dial type.

The former consists of a metal rod that floats on top of the oil and is connected to a measuring device; the latter has a pointer that rests on a calibrated scale.To read either type of gauge, simply note where the indicator falls on the scale (for floating arm gauges) or points to (for dial gauges). For example, if the indicator is at the “1/4” mark on a floating arm gauge, that means there are approximately 25% gallons left in the tank; if it’s at “9 o’clock” on a dial gauge, there are approximately 90% gallons left in the tank.

It’s important to check your oil level regularly so you don’t run out unexpectedly; most furnaces require at least 1/8th of a tank to operate properly. If your gauge shows that you’re getting close to empty, be sure to call your heating company for a delivery as soon as possible.

Pin It on Pinterest

Share This
Scroll to Top